001//
Remove POD and all parts required for assembly. Lay out parts required
002//
Screw the Click-Connectors onto the POD
2.A//
If hoses are not preassembled, manually attach the Click-Connect nozzles to one end of
each hose. On the other end of one hose, attach
the filter
003//
Attach the castor wheels and the locking castor wheels to the bottom of the POD
004//
Attach the power cable to the back of the POD, plug the power cable into the closest electrical outlet
005//
Attach the Click-Connect hoses to your machine, by pushing it firmly into place until you hear a “click”x
Ensure the hose with the filter is connected to the inbound connection. Confirm by gently pulling the filter end; the shorter hose will be attached to the inbound connection.
5.A//
Ensure the hose with the filter is connected to the inbound connection. Confirm by gently pulling the filter end; the shorter hose will be attached to the inbound connection.
006//
Use the suction attachments to anchor the hoses to the side of your tub.
007//
Turn on your POD and set the your desired temperature. Be sure to allow for 12” of space between the back of the unit and a wall or tub.